Worum handelt es sich bei deiner Anfrage?


HERO3+ Black Edition



Anleitung für Musik-Paket

Antworten auf die häufigsten Fragen:

So verbindest du die Kamera mit der GoPro App

To pair your GoPro camera with the GoPro App, please follow these steps: Power on your camera.  If you're using an HD HERO2 camera, with both units already powered on, attach the Wi-Fi BacPac to the HD HERO2 camera. Press the Wi-Fi button on the side of the HERO3/HERO3+ camera or Wi-Fi BacPac to go to the Wi-Fi menu.  Note - you'll need to press the button two times if you're using the HERO3+ or HERO3 camera. If you have a HERO3/HERO3+ camera, select "GoPro App", or if you have an... Read More »

So überprüfst du deinen GoPro-Bestellstatus

If you want to check your GoPro Order Status, we have a tool that will allow you to do that. GoPro Order Status If you enter your info in the tool linked above you will see all the details about your GoPro order, including its status and tracking information.

Auflösungen der HERO3+, die von der Vorschau der GoPro App (iOS und Android) unterstützt werden

The following chart shows the supported video resolutions for video preview in the GoPro App.   *If preview doesn't start using 960p, try using a different resolution such as: 1080p or 720p


We have tested the following HD-SDI converters and they are compatible: Atomos Connect HDMI/HD-SDI converter BlackMagic Design Mini Converter HDMI to SDI  Datavideo DAC-70 UP/Down/Cross Converter The supported resolutions are dependent on what these converters can support.  For example we have found that using 720-120 outputs [720p (progressive) and 60 fps] successfully.

HERO3+ Kamera bleibt während des Update-Prozesses stecken

In some rare cases you may encounter an issue where the HERO3+ Black Edition or HERO3+ Silver Edition camera gets stuck indefinitely while updating and never fully completes the update process.  If this happens, please follow these steps to resolve the issue: Remove and reinsert the battery. Press the Power button to power ON the camera. The update should then complete as expected. If the update does not complete, wait 5 minutes and then remove and reinsert the battery again. Press the Power button to power ON the camera. If you... Read More »

Erklärung der erweiterten Protune-Kontrollmöglichkeiten

With HERO3+ Black Edition version HD3.11.02.00 and higher, there are advanced Protune™ controls for Color, ISO Limit, Sharpness and Exposure.  These advanced Protune settings provide a greater degree of control compared to the previous Protune implementation. Note: These Protune options can be adjusted in both the camera and the GoPro App. Setting Explanations (*) denotes the default settings   White Balance White Balance adjusts the overall color tone of videos. You can make adjustments to White Balance when shooting in Protune mode. Auto* 3000K (for use in warm light, eg. incandescent, sunrise/sunset) 5500K (for use in slightly cool... Read More »

Akku-Informationen beim Dual HERO System

Can the cameras be plugged into power while the cameras are recording?Yes, you can plug the Dual HERO System BacPac into power while recording. You can also use the combo cable while recording for a mic and power. Can you use the Dual HERO System if the two camera batteries are both not fully charged, or at the same charge level?Yes, the two camera batteries do not need to be equally charged. When one camera battery dies, the camera LCD will say 3D lost sync and recording will stop. Does one... Read More »

Informationen zu SD-Karten beim Dual HERO System

What happens if an SD card failed on one camera and not the other?  If the SD card fails, and the camera recognizes the error it will show that 3D is out of sync and stop the recording on both cameras. If the SD card fails, but the camera does not recognize it then the cameras will continue to record; when the files are uploaded if they are corrupt it will not be able to create 3D footage.  If this happens you can either create a 2D clip from the card... Read More »

Arbeitsablauf beim Dual HERO System – Einrichtung und Aufnahme

Setup and recording with the Dual Hero System is very easy and straight forward.  If you know how to record with a GoPro previously, you are already ~90% there. Setup Step 1 - Get your cameras and SD cards  Before getting started, you will need 2 Hero3+ Black edition cameras running the same firmware (2.0 or higher). We recommend having 2 identical SD cards (both class 10, both formatted, and preferably the same brand) You can use 2 different SD cards, but it is imperative to be sure that they are... Read More »

Anforderungen des Dual HERO Systems

In order to use the Dual HERO System there are a few requirements that must be met: To use the Dual HERO System Both HERO3+ Black Edition cameras updated to software version 2.0. The HERO3+ Black Edition is the only camera model that is supported by the Dual HERO System. The Dual HERO System BacPac version 1.17. To use the GoPro App with the Dual HERO System GoPro App 2.3 or higher installed on a supported mobile device. To use GoPro Studio with the Dual HERO System GoPro Studio Mac: ( Read More »